- Stock: In Stock
- Brand: Dayton Audio
- Model: kit UM15-22
- Weight: 12.70 Kg
Build one of the most powerful subwoofers you'll ever experience using this precision-cut, CNC-machined subwoofer cabinet and the Dayton Audio UM15-22 15" subwoofer.
Highlights
85 liter cabinet made of 3/4" MDF panels with a 1-1/2" thick front baffle
CNC-machined dadoes, subwoofer cutout and recess, and a unique bracing system that increases cabinet rigidity
Dayton Audio 18" Reference Series High Output subwoofer included
Product Details
Denovo 15" Ultimax Subwoofer and Cabinet Bundle
The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.
This particular cabinet is designed specifically for the Dayton Audio 15" Ultimax subwoofer, but works for any subwoofer with an overall diameter of 390 mm or less, and a cutout requirement of 355 mm or less. For optimum performance with the Ultimax 15" subwoofer, add three pounds of Acousta-Stuf polyfill for a Qtc of 0.707 and an f3 of 35 Hz.
During the CNC manufacturing process, rabbets dadoes are cut into the back panel for precise panel alignment. A unique three-piece brace adds superior rigidity without affecting the subwoofer's performance. Both side panels feature 3/4" rabbeted extensions with recesses to perfectly install the first piece of the two-part, double thick baffle. Plate amplifier installation is made easy by following the scribed interior guide with a jig saw and by modifying one of the braces.
The end result is a resonance-free, sealed subwoofer cabinet that is purpose-built to extract the best performance from Dayton Audio's 18" High Output Reference Series subwoofer. All that's left to do is finish it to match your décor or paint it to stand out. When your friends ask about it, you get the pleasure of saying, "I built it myself!"
Dayton Audio's Ultimax Series DVC subwoofers are purpose-built to move air and create clean, articulate, fast bass. Experience the apex of subwoofer design.
Highlights
- Sweeps massive amounts of air!
- Over 1-1/2" of total cone travel
- 800 watts RMS power handling
- The latest in subwoofer technology
- Dual linear stiffness spiders limit distortion and rocking modes
- Dual 2 ohm, 2-layer copper voice coils
- Large vented pole piece and under-spider venting
Product Details
Dayton Audio UM15-22 15" Ultimax DVC Subwoofer 2 ohms Per Coil
If you want outrageous amounts of bass, you gotta move some air
The Ultimax Series of dual voice coil subwoofers, from Dayton Audio, are not for the faint of heart. Built using the latest in subwoofer technology, Ultimax subwoofers are the pinnacle of low frequency driver design. An Ultimax subwoofer tests the strength of your foundation with fast, articulate, gut-wrenching bass.
The versatility you need for mobile, home, or pro subwoofer excellence
Dual 2 ohm voice coils allow for stereo 2 ohm and mono 1 ohm wiring configurations when connecting to high current car audio and professional audio amplifiers to extract maximum power. For home audio applications, simply wire the voice coils in series for a benign 4 ohm load for greater amplifier compatibility.
Built to produce massive low frequency output and keep on doing it
To improve power handling, increase thermal management, and reduce power compression, Dayton Audio designed the Ultimax Series with large black anodized formers and vented pole pieces, under-spider ventilation, and two-layer copper voice coils.
Over 1-1/2" of travel (3/4" Xmax) is kept completely linear through the use of dual spiders that also limit distortion and rocking modes. "Tall-boy" rubber surrounds with integrated gaskets maintain driver surface area during extreme excursion moments. Thick, one-piece Nomex honeycomb covered cones are covered with woven, heavy-duty glass fibers creating ultra-still cones that resist deformation.
A strong motor takes you to wherever you want to be
A large copper sleeve and copper pole cap in the motor reduce energy storage from inductance, with the side benefit of lowering distortion for "faster" response. Large dual-stacked, high-energy magnets handle the heavy lifting and bring Qts down to a level where Ultimax subwoofers can be used in vented or sealed cabinets and enclosures.
Cabinet recommendations:
- Sealed 3.1 cubic ft. (net internal) with 3 lbs. of Acousta-Stuf polyfill, f3 of 35 Hz with a 0.707 Qtc alignment
- Vented 6.0 cubic ft. (net internal, not including driver or port volume) with 6 lbs. of Acousta-Stuf tuned to 18 Hz with two 4" diameter by 26" long flared ports for an f3 of 22 Hz. Larger cabinets and lower tuning frequencies are possible.
Note: All parameters derived with voice coils wired in series.
PRODUCT SPECIFICATIONS
Nominal Diameter |
15" |
Power Handling (RMS) |
800 Watts |
Power Handling (max) |
1600 Watts |
Impedance |
4 ohms |
Frequency Response |
15 to 1,000 Hz |
Sensitivity |
86.5 dB 2.83V/1m |
Voice Coil Diameter |
2.5" |
THIELE-SMALL PARAMETERS
Resonant Frequency (Fs) |
19.5 Hz |
DC Resistance (Re) |
3.4 ohms |
Voice Coil Inductance (Le) |
1.31 mH |
Mechanical Q (Qms) |
2.40 |
Electromagnetic Q (Qes) |
0.59 |
Total Q (Qts) |
0.47 |
Compliance Equivalent Volume (Vas) |
7.92 ft.³ |
Mechanical Compliance of Suspension (Cms) |
0.24 mm/N |
Diaphragm Mass Inc. Airload (Mms) |
279.4g |
Maximum Linear Excursion (Xmax) |
19 mm |
Surface Area of Cone (Sd) |
814.6 cm² |
MATERIALS OF CONSTRUCTION
Cone Material |
Nomex / Glass Fiber |
Surround Material |
Rubber |
Voice Coil Wire Material |
Copper |
Voice Coil Former |
Aluminum |
Basket / Frame Material |
Cast Aluminum |
Magnet Material |
Ferrite |
MOUNTING INFORMATION
Overall Outside Diameter |
15.28" |
Baffle Cutout Diameter |
13.78" |
Depth |
7.55" |
Bolt Circle Diameter |
14.65" |
# Mounting Holes |
8 |
OPTIMUM CABINET SIZE (DETERMINED USING BASSBOX 6 PRO HIGH FIDELITY SUGGESTION)
Sealed Volume |
3.98 ft.³ |
Sealed F3 |
33 Hz |
Vented Volume |
11.1 ft.³ |
Vented F3 |
17 Hz |