ROCKFORD FOSGATE SSK 300 MK III - bass kit consisting of subwoofer in R1-1X12 case and R150X2 amplifier

Manual 

Rockford Fosgate SSK 300 MKIII bass kit consisting of subwoofer in R1-1X12 case and R150X2 amplifier

PRIME R150X2 is a 2-channel amplifier capable of pumping 75 Watts into both channels at 2 ohms, making it perfect for full range or component speakers. The R150X2 can also operate in bridge / mono mode for use with subwoofers.

RMS powers:

• 50 Watts x 2 @ 4-Ohm
• 75 Watts x 2 @ 2-Ohm
• 150 Watts x 1 @ 4-Ohm Bridged

• R1-1X12 is a box built with durable MDF and covered with high density carpet, with a single 30cm (12 ") subwoofer inside.
• RMS power 200W and maximum power 400W.
• Technical characteristics of the R1-1X12 subwoofer
• Woofer size: 30cm (12 ")
• Nominal Impedance: 4 Ohm
• Internally wired to create a 4 Ohm amplifier load
• Power Management: 200 Watts RMS
• Power managed: 400 Watts max
• System configuration: closed case
• Box material: 5/8 "MDF (medium density fibreboard)
• Speaker connector: up to 12 AWG
• Shipping Weight: 24.6 kg. (11.1 Kg.)
• Case dimensions (H x W x D1 x P2): 36.5cm x 45cm x 18.1cm x 31.8cm

R150X2 amplifier features

• Number of channels: 2

Nominal power:

•  50 Watts x 2 @ 4-Ohm
• 75 Watts x 2 @ 2-Ohm
• 150 watts x 1 @ 4-Ohm bridged

• Efficiency (average): 66% @ 4-Ohm
• Crossover Controls: High Pass / Low Pass (HP / LP): 50-250Hz at 12 dB / octave Butterworth
• Tone Controls: Punch Bass: 0dB to + 12dB at 45Hz
• Signal input: low level: 1 pair RCA
• Signal output: low level: 1 pair RCA
• Power input connector: screw terminal
• Power cord gauge: 4 AWG
• Speaker output connector: screw terminal
• Speaker wire gauge: 8 AWG
• Heatsink type: extruded aluminum
• Cooling: convection
• Visual indicators: Power / Protect LED
• Circuit topology class: Class A / B
• Frequency response: 20Hz to 20kHz +/- 1dB
• Dimensions (HxWxL): 1.98 x 6.77 x 11.22 (inch) / 5 x 17.2 x 28.5 (cm)