LaVoce DF10.10L - Driver 1" 8 ohm

Manual

General Specifications

• Throat diameter mm (in) 25,4 (1)
• Nominal impedance Ohm 8
• Minimum impedance Ohm 6
• Program power (1) W 40
• AES Power rating (2) W 20
• Sensitivity (3) dB 107
• Frequency range Hz 1500 ÷ 18000
• Voice coil diameter mm (in) 25,4 (1)
• Magnet material Ferrite
• Coil material CCAW
• Former material Kapton
• Diaphragm material High temperature polymer
• Surround material High temperature polymer
• Magnet OD mm (in) 85 (3.3)
• Voice coil inductance mH 0,03
• Flux density T 1,5
• Recommended crossover (4) Hz 2500
• Driver displacement volume l (ft³) 0,2 (0.007)

Shipping Information

Multipack weight kg (lb) 11,5 (25.2)

Multipack size W x D x H mm x mm x mm (in x in x in) 498 x 412 x 98 (19.6 x 16.2 x 3.9)

Net weight kg (lb) 0,8 (1.7)

Notes

1 - Program power is defined as 3 dB greater than AES Power.

2 - Tested for 2h using a continuous, band-limited (2500-20000 Hz, 12dB/oct.) pink noise signal as per AES 2-1984 Rev. 2003.

3 - Measured on axis at 2.83V, 1m, driver mounted on 80° x 80° horn, SPL averaged in the frequency range 2000 ÷ 18000 Hz.

4 - High pass filter with slope 12dB/oct. or higher.