Audison APBMW S8-4 - SUBWOOFER 200mm 4 Ohm for BMW

Datasheet

Audison APBMW S8-4 subwoofer 200 mm, impedance 4 Ohm, specific for BMW and Mini car models

APBMW S8-4 is a subwoofer designed with electro-acoustic parameters that maximizes performance for the under-seat factory box, has a fiberglass-reinforced ABS plastic basket, and an acoustic structure with front magnet that minimizes the depth of installation, for perfect compatibility with the spaces available in BMW and Mini cars. Two 5 mm polyurethane gaskets, supplied with the APBMW S8-4, allow the subwoofer to adapt perfectly to the box, decoupling it from vibrations.

The Audison APBMW S 200mm (8 ") subwoofers are the Plug & Play replacement of the OEM speakers, making the most of the standard acoustic load, generating strong and deep low frequencies. You can choose between the two models: APBMW S8-2 with impedance 2 Ohm and APBMW S8-4 with an impedance of 4 Ohm, recommended for the versatility of the composition of the system and connected with the AP8.9 bit, can be configured in bridge mode by delivering 130 W RMS to each APBMW S8-4 installed at on board the car.

The 2 Ohm impedance of the APBMW S8-2 sub can be used in a fully active multi-amplified front system, maximizing the power of the AP 8.9 bit at 2 Ohm and using additional 2 channels for the rear system.

The neodymium magnet available on both models allows greater power and control than a ferrite magnet.

Strengths of the APBMW S8-4 subwoofer

• Developed with electroacoustic parameters customized for BMW cars, it increases listening involvement, with powerful and defined low frequencies, taking advantage of the acoustic loading offered by the position.
• Neodymium magnetic unit with inverted acoustic structure with internal cone, to maximize performance while minimizing dimensions and weights.
• 38 mm reel wound with aluminum support for high power dissipation and stability, even during high excursions.
• Two 5mm thick gasket supplied for installation in preparation.
• 2 Ohm configuration for maximum efficiency in combination with AP 8.9 in active multi-amplification.

Technical specifications of the APBMW S8-4

• Diameter 200 mm (8 ")
• Maximum power 300 W
• Nominal power 150 W
• Impedance 4 Ω
• Frequency response 35 ÷ 500 Hz
• SPL 88 dB
• Magnet size D x d x h 48 x 18 x 7 mm (1.89 x 0.71 x 0.28 ")
• Weight of each subwoofer 1.21 kg (2.67 lb)
• Voice coil diameter Ø 50 mm (2 ")