Audison APS 10 D - SUBWOOFER 250mm 4+4 Ohm

Data sheet

Manuale 

Allegato Prima subwoofer

Audison APS 10 D thin sub 250mm high efficiency with double coil, designed to offer maximum performance in boxes with an ultra-compact volume (10 lt. - 12 lt).

Dual voice-coil and push connectors, easy wiring and configuration. The components of the Prima APS 10 D subwoofer have been developed with one primary objective: to provide high performance in confined spaces. They employ a particular cone-dustcap-basket geometry that guarantees great excursion of the mobile unit, the cooling circuit has been designed with air intakes on the basket under the spider, eliminating the need for other air intakes

Audison APS 10 D Features:

• Ultra-low profile (4.7 in / 120 mm) for maximum installation flexibility.
• Designed to provide the best performance in a reflex case starting from 10 liters
• Exclusive design of the geometry of the cone, dust guard and basket to obtain a wide linear excursion (11 mm in one direction), keeping the depth required for assembly to a minimum.
• Holes in the basket under the spider that eliminate the need for the central hole in the bottom-plate and allow installation in the rear wall of the box.
• Imposing magnetic group optimized with FEM (Finite Element Modeling) methods for perfect control in wide excursion conditions.
• Cone in cellulose fiber with 25 cm water repellent treatment, with profile developed with FEM simulations and optimized with Klippel Scan Vibrometer.
• Designed with dual coil to offer the best performance in combination with Audison AP8.9 bit (2 + 2 CH bridge channels), AP5.9 bit (sub channel) or AP4.9 bit / AP4 D (2 bridge channels) amplifiers ).
• 8 Metal mesh grill and plastic gasket included.

Technical specifications Audison APS 10 D

• Subwoofer size mm (in.) 250 (10)
• Voice coil subwoofer Ø mm (in.) 60 (2.36)
• Power handling W peak 800
• W continuous 400
• Impedance Ω 4 + 4
• Center to center distance mm (in.) 255 (10.04)
• Midrange magnet size Dd h mm (in.) 140 (5.51) x 70 (2.76) x 30 (1.18)
• Total driver displacement l (cu.in.) 1.12 (0.02)
• Hole diameter mm (in.) 5 (0.2)
• Weight of one speaker kg (lb) 5.245 (11.56)
• Magnet High density flux ferrite
• Cone Water repellent pressed paper
• * Xmech mm (in.) ± 18 (0.71)