-160x160w.jpg)
-500x500.jpg "Dayton Audio LW150-4 6\" Low Profile Woofer 4 Ohms")
-500x500.jpg "Dayton Audio LW150-4 6\" Low Profile Woofer 4 Ohms")
-100x100.jpg "Dayton Audio LW150-4 6\" Low Profile Woofer 4 Ohms")
-100x100.jpg "Dayton Audio LW150-4 6\" Low Profile Woofer 4 Ohms")
- Stock: In Stock
- Brand: Dayton Audio
- Model: LW150-4
- Weight: 0.36 Kg
The Dayton Audio LW150-4 6" woofer's unique venting allows zero-clearance installation in ultra-low profile applications. Solid bass output can be produced from spaces never thought possible.
Highlights
- Very low profile woofer fits in tight spots
- Flat woven glass-fiber/honeycomb aluminum composite cone
- Dual sandwiched spiders and S-shaped surround enhance linear travel capability
- Large 1-1/4" 4-layer voice coil and optimized T-pole gap geometry
- Peripheral holes in spider landing enable zero-clearance venting in shallow enclosures
- Great for on-wall, in-wall, or car audio applications
Product Details
Dayton Audio LW150-4 6" Low Profile Woofer 4 Ohms
The unique and versatile Dayton Audio LW150-4 6" woofer was designed for space limited, minimum depth applications. Its low-profile frame and unique venting permit the back of the woofer to be placed directly against cabinet walls or even embedded (countersunk) into the cabinet, resulting in an enclosure less than 1-1/2" deep. Great match for today's ultra-thin TVs or use as a down firing subwoofer in a low powered system, low-frequency down-firing driver in a center channel/monitor stand, or bookshelf stand.
PRODUCT SPECIFICATIONS
|
Nominal Diameter |
6" |
|
Power Handling (RMS) |
40 Watts |
|
Power Handling (max) |
80 Watts |
|
Impedance |
4 ohms |
|
Frequency Response |
60 to 1,800 Hz |
|
Sensitivity |
82.6 dB 2.83V/1m |
|
Voice Coil Diameter |
1.25" |
THIELE-SMALL PARAMETERS
|
Resonant Frequency (Fs) |
62.6 Hz |
|
DC Resistance (Re) |
3.60 ohms |
|
Voice Coil Inductance (Le) |
0.86 mH |
|
Mechanical Q (Qms) |
6.01 |
|
Electromagnetic Q (Qes) |
0.72 |
|
Total Q (Qts) |
0.64 |
|
Compliance Equivalent Volume (Vas) |
0.12 ft.³ |
|
Mechanical Compliance of Suspension (Cms) |
0.296 mm/N |
|
BL Product (BL) |
6.51 Tm |
|
Diaphragm Mass Inc. Airload (Mms) |
21.8g |
|
Maximum Linear Excursion (Xmax) |
4 mm |
|
Surface Area of Cone (Sd) |
91 cm² |
MATERIALS OF CONSTRUCTION
|
Cone Material |
Carbon Fiber Composite |
|
Surround Material |
Rubber |
|
Voice Coil Wire Material |
Copper |
|
Voice Coil Former |
Kapton® / Polyimide |
|
Basket / Frame Material |
Cast Aluminum |
|
Magnet Material |
Neodymium |
MOUNTING INFORMATION
|
Overall Outside Diameter |
6" |
|
Baffle Cutout Diameter |
5.125" |
|
Depth |
1.5" |
|
Bolt Circle Diameter |
5.5" |
|
# Mounting Holes |
4 |
OPTIMUM CABINET SIZE (DETERMINED USING BASSBOX 6 PRO HIGH FIDELITY SUGGESTION)
|
Sealed Volume |
0.24 ft.³ |
|
Sealed F3 |
77 Hz |
|
Vented Volume |
0.33 ft.³ |
|
Vented F3 |
40 Hz |
